Toll free telephone:0577-67353615 67354920 67356615
Banner
Home > news > Content
What is the reason for the overheating of the diaphragm filter press?
- 2020-03-02-

What is the reason for the overheating of the diaphragm filter press?


Diaphragm filter press, also known as diaphragm filter press, is a filter press with a layer of elastic membrane installed between the filter plate and the filter cloth. During the use process, when the feeding ends, high-pressure fluid or gas medium can be injected into In the diaphragm plate, at this time, the entire diaphragm will bulge to press the filter cake, and then further dehydration of the filter cake is realized, which is commonly referred to as pressing filtration.


The hydraulic system of the filter press is closely related to the temperature. The temperature of the hydraulic system can be controlled by installing a heat release device, so that the filter press can operate normally. Special attention should be paid to the fact that the temperature of the hydraulic station should not be too high, because This will affect the hydraulic system and cause the system to not function properly.


The filter plate of the filter press is made of polypropylene, which can effectively prevent overheating, slow down the temperature increase, and reduce the decomposition and oxidative deterioration of the filter plate of the filter press. Cycle. Reduce the damage of the filter plate, improve the production rate, and obtain greater profits.