The filter cloth of the filter press is not placed correctly, causing water leakage without filtering

The pressure of the plate and frame filter press is insufficient. The filter plate and filter cloth are under strong pressure to achieve a closed filter chamber structure. When the pressure is insufficient, the pressure applied to the filter plate is less than the pressure of the filtrate. Of course, the filtrate can naturally pass through the gap. penetration.

When the edge of the plate and frame filter press is damaged, even if one side is slightly raised, even if one side is often worn, it will come into contact with other filter plates. Regardless of the pressure, the formed filter chamber will penetrate. In this case , We judge from the leak point that the penetration force of the filter plate is usually very large, and it can even be sprayed.

The filter cloth of the plate and frame filter press is not placed correctly. There are many reasons why the filter chamber cannot be sealed. We need to start with a simple filter chamber around to see if the filter cloth is wrinkled or the filter cloth edge is defective. Due to the structure of the filter chamber Between the filter plate and the filter cloth and under a lot of pressure, the filter plate is usually less prone to problems, and the rest is the filter cloth. A seal is formed between the hard filter plates to play a key role in the filter cloth. Natural Wrinkles or defects in the filter cloth can cause gaps between the filter plates and the natural filter chamber will not form a seal.