First, the automatic adjustment equipment of filter cloth:
The automatic deviation adjustment of the filter cloth of the filter press is that the deviation of the filter cloth drives the rolling of the cross adjustment rod. The rolling of the cross adjustment rod causes the pneumatic valve to act. The pneumatic valve passes through the 8mm air pipe and is connected to the two-way cylinder. The piston rod of the two-way cylinder One end is fixed on the frame, the piston rod at the other end is connected with one end of the deflection adjusting roller, and the other end of the deflection adjusting roller is fixed on the frame through the hinge, and the elasticity of the bidirectional cylinder piston drives one end of the deflection adjusting roller to move. One end of the deflection roller is fixed, and the other end is driven by the cylinder, then the angle between it and the front and rear rollers will be changed, and the angle between the roller and the roller will cause the roller to generate axial force. When the deflection roller is adjusted , the axial component force generated by the angle 1 between the idler and the roller is the same as the component force causing the deviation of the filter cloth, and when the direction is opposite, the resultant force of the deviation of the filter cloth is zero, thus achieving the automatic control of the filter cloth. Deviating intent.
2, Manual adjustment equipment for the deviation of the filter cloth
The manual conditioning roller of the filter cloth is installed on a bearing seat that can slide on the track box. One end of the track box is connected with one end of a conditioning screw, and the other end extends through the support fixed on the frame to install the handle. , As long as the handle is rolled, the adjustment screw can be rolled, and the adjustment screw drives the track box to run back and forth on the slideway, and the manual deflection roller moves back and forth with the track box, so that the angle between the manual deflection roller and the idler can be adjusted so as to To achieve the adjustment of the deviation of the filter cloth.
3, the adjustment of the deviation of the filter cloth
The adjustment of the deviation of the filter cloth is mainly the adjustment of the roller, that is, the adjustment of the center line of the roller and the roller. The most important deviation is the adjustment of the automatic deviation adjustment roller, the manual deviation adjustment roller and the tension roller.
- Filtration principle and operation of plate and frame filter press
- Different matters that should be paid attention to in the use of the filter plate of the diaphragm filter press
- What is the influence of the working period of the diaphragm filter press?
- The reason for the leakage of the box filter press
- Filter bag replacement and pressure condition of super essential oil filter
- The particularity of filter cloth used in plate and frame filter press
- What is the pressing principle of the diaphragm filter press?
- Introduction to filter maintenance
- What is the filtration speed, operation method and development direction of the filter?
- What is the impact of pump selection and insufficient pressure in filter presses?
- Application of filter press in solidification treatment of pile foundation discarded mud
- When the pressure of the filter plate of the filter press is less than the normal number, it is forbidden to start the operation
- Which filter press has the best effect in sludge treatment?
- What are the factors that affect the filtering time of filter equipment?
- After the diaphragm filter press is normal, the filter plate can be pressed and filtered
- How does the filter press filter cloth automatic cleaning system work?
- Filter press price and selection of filter press accessories
- Analysis of the method when installing environmental protection sewage treatment machine
- Reasons for distinguishing the process of filter press
- What is the reason for the expansion of the filter plate of the diaphragm filter press?