Talking about the structure of stainless steel filter

We are familiar with stainless steel high-flow filters, which can be divided into two types: high-flow filter element filter\/large-flow bag filter. main body.

The structure and structure of the high-flow filter element are briefly described as follows: 1. The main body of the equipment has a cylinder, upper and lower heads, inner baffles, inlet and outlet, sewage outlet, large-flow filter element, pressure gauge, exhaust valve, boom , The compression bolts and other accessories are composed of 2. In general, the structure is divided into two ways to connect the pipelines: the side is close to the bottom, and the side is close to the top and the bottom is discharged. The separation layer is formed, and the sealing layer is that the impurities in the liquid are separated by the filter element, the clean liquid flows out from the outlet, and the impurities are intercepted by the filter element and flow out through the sewage outlet.

The structure of the high-flow filter element is similar to that of the high-flow filter element. The structure is simple and has the following points: 1. The main body of the equipment has a cylinder, an upper and lower head, an inner partition, an inlet and outlet, a sewage outlet, a PP filter bag, and a pressure gauge. , Exhaust valve, boom, compression bolts and other accessories are composed of 2. In general, the structure is divided into side-by-side measurement and bottom emptying method to connect the pipeline; 3. The internal structure uses PP filter bags as filter units, which are formed by internal partitions. Separation layer, sealing layer is that the impurities in the liquid are separated by the filter PP bag, the clean liquid flows out from the outlet, and the impurities are intercepted by the filter bag.