Toll free telephone:0577-67353615 67354920 67356615
Banner
The solution to the poor sealing of the filter chamber of the filter press
- 2022-01-21-

In the use of the filter press, there will inevitably be some problems. The common ones are the poor sealing of the filter chamber, which causes the filtrate to flow out from the gap between the filter plates, which affects the production situation. So how to solve this problem? The following is You describe the reasons and solutions.

The solution to the poor filter seal of the filter press:

1. Lack of stress:

The filter plate and filter cloth must be under strong pressure to achieve a closed filter chamber structure. When this pressure is lacking, when the pressure applied to the filter plate of the filter press is less than the pressure of the filtrate, the natural filtrate will also be released. It will naturally be able to penetrate through the gap.

2. Deformation or damage of the filter plate:

When the edge of the filter plate is damaged, even if it is slightly raised, even if the square is often worn, and if it is touched with other filter plates, no matter what the pressure, the formed filter chamber will penetrate. Judging from the situation, because the filter plate is damaged and the penetration is generally larger, it may even be sprayed.

3, the wrong placement of the filter cloth:

There are many reasons why the filter chamber cannot be sealed. We need to start with a simple one and surround the filter chamber for 4 weeks to see if the filter cloth is wrinkled or the edge of the filter cloth is damaged. Because the structure of the filter chamber is composed of filter plates and filter cloths Mutual cuttings are formed by strong pressure. Generally, the filter plate is not easy to cause problems, and the rest is the filter cloth.

It is necessary to form a seal between the sturdy filter plates, which plays a key role in the filter cloth. The wrinkles or damage of the natural filter cloth will easily form a gap between the filter plates, and the natural filter chamber will not form a seal.

The above are the reasons and solutions for the poor sealing of the filter chamber of the filter press sorted out by Xiaobian for everyone. I hope it can be helpful to everyone.