Toll free telephone:0577-67353615 67354920 67356615
Banner
Home > news > Content
Talking about the relationship between water inflow and water outflow of high-pressure diaphragm filter press
- 2020-07-13-

Talking about the relationship between water inflow and water outflow of high-pressure diaphragm filter press


What is the relationship between the water input and the water output of the high-pressure diaphragm filter press? Today, the editor will tell you about it, hoping to help you.


Generally, everyone thinks that the water input of the high-pressure diaphragm filter press is the water output of the filter press, and the two are equal. How much water is discharged at a speed. In fact, this is not an incorrect understanding.


In the water flow process of the high-pressure diaphragm filter press, the actual feed pump draws the filtrate containing water into the filter chamber of the filter press, and is filtered by the filter cloth on the filter plate of the filter press. It is equivalent to the filter chamber of the filter press, which plays a certain amount of storage, but this amount is in a certain scale. The high pressure diaphragm filter press is too large and affects the service life of the filter cloth and filter plate of the filter press. If the filter press is too small, it will affect the normal filtering power of the filter press, which greatly reduces the filtering power of the high-pressure diaphragm filter press.


However, the water intake of the high-pressure diaphragm filter press is largely determined by the feed pump, and the conveying capacity of the high-pressure diaphragm filter press and the feed pump is determined by some factors such as the power and head of the feed pump. For the high-pressure diaphragm filter press, the larger the filtering area, the greater the filtered water inflow required by the high-pressure diaphragm filter press. Therefore, the larger the filtering area, the higher the required feed pump power of the filter press. The larger it is, the density of the filtered material depends on the head of the corresponding feed pump.


The above is the contact introduction of Xiaobian about the water inlet and outlet of the high-pressure diaphragm filter press. I believe that everyone will understand it after reading it. If you have any other questions or are interested in our products, you are welcome to inquire. We will serve you wholeheartedly.