What is the reason for the overheating of the programmable diaphragm filter press?

There are two reasons for the overheating of the programmable diaphragm filter press: one is the hydraulic system, and the other is the filter plate of the filter press. The hydraulic system of the filter press is closely related to temperature. The temperature can be controlled by the cooling device of the hydraulic system to make The filter press can operate normally, and the temperature of the hydraulic station should not be too high. This will affect the hydraulic system, and then cause the system to not operate normally. The filter plate of the filter press is made of polypropylene, which can effectively avoid overheating and slow down the temperature rise. High, reduce the differentiation and oxidative degradation of the filter plate of the filter press, and increase the service life of the filter plate. Reduce the damage of the filter plate, improve the productivity, and obtain greater profits.

If the filter press is overheated, it will not only have a great impact on the operation of the staff, but also have a certain impact on the filtrate during the operation, which will cause changes in the filtrate and affect the separation effect. Therefore, you should Watch out for overheating of the filter press.

1. If the bearing of the programmable diaphragm filter press is found to be damaged, it must be replaced in time. When installing new bearings, a very high standard is required, and care should be taken instead of carelessness.

2. Prevent strong impact on the bearing, and prevent scars, indentations and cracks.

3. In the process of using the program-controlled diaphragm filter press, please pay attention to the anti-rust treatment of the bearing regularly, and do not let too much water get dirty. Clean, lubricate and maintain the periphery of the bearing seat.

The above is the information about the overheating of the filter press. I hope it will help you. If you want to know more relevant professional knowledge, please call us for consultation.