Toll free telephone:0577-67353615 67354920 67356615
Banner
Home > news > Content
What are the problems that need to be paid attention to after using the stainless steel filter press?
- 2021-07-26-

Stainless steel filter presses are used in many industries, and they have many advantages. However, stainless steel filter presses also involve many issues that need to be paid attention to after use. What are the problems that need to be paid attention to when the filter press is used? If you want to know, just follow the editor to look down.

Stainless steel filter press is also a relatively common product. Due to its own advantages, it is very popular in the market. Now it has been widely used in chemical, pharmaceutical, food and other industries. This product and other equipment It is the same, whether you are using it or after it is used up, it must be well maintained. After the stainless steel filter press is installed and used, it is very important for us to check the machine. If this work If it is not done well, it will affect the operation and service life of the stainless steel filter press in the future. Therefore, it is necessary to do a good job in the inspection of the equipment, including the content of hydraulic liquid and the liquid pressure coefficient of the hydraulic station.

Of course, in addition to these local needs to pay attention to, the air compressor of the stainless steel filter press and the oil viewing window of its speed regulating motor also need to be checked. Generally, new equipment will be lubricated before purchase. It will continue to be checked after a month of use. If it is found that the lubricating oil is lacking, it must be increased in time. We check the content of these gases by checking the valve activation of the air hole of the stainless steel filter press. For the stainless steel filter press The inspection of the filter plate is also to be carried out. Generally, the filter plate of the van-type stainless steel filter press can be seen from the initial stage to be good or bad, so it is recommended that we check the oxidation of the filter plate.

Because in the case of long-term corrosion by water, the water content of the filter plate and the depth of corrosion by water will be affected. And we also need to check the filter cloth of the stainless steel filter press for one month. Here we mainly check it Whether the filter is damaged or not, and whether the filter flow is normal. These are all issues that we need to pay attention to, which are directly related to whether the equipment can be used normally. However, this situation will not occur after maintenance.